cnc milling machine

Standard Feature:

X, Y, Z Guide: Rolling ball screw
X, Y, Z Work Area: 385x315 x 55(mm)
Drive type: Stepper motor
Spindle: 800W high speed (water cooling)
Max Speed: value="4000" tcsc="0" unitname="mm" w:st="on">4000mm/min
Resolution: ≤ value=".05" tcsc="0" unitname="mm" w:st="on">0.05mm
Repeatability: ≤ value=".05" tcsc="0" unitname="mm" w:st="on">0.05 mm
Interface: DSP handle (read USB memory directly)
Ncstudio & Mach3 optional
Command code: HPGL, G-code
Spindle tools: ф3.175, ф6 · Power: AC220V±10% / 50~60Hz
Machine dimensions (mm):
Warranty: 12 Months (6 months for Spindle)

Application: PVC materials, plastic, bamboo, acrylic, ABS, even some soft metal like aluminum will also be ok.

Introduction:

This model is popular for hobby fans to make some PCB sample, cnc millings, small model design, small machine parts, artcraft, etc

◆Special spindle design, start a new style of kiwi series. Small, simple, this is the main features. But it can provide you an amazing result with its strong structure.

◆Even small, we still use 800w spindle to give it enough power. Ball screw gives it good resolution and less noise.

◆ Separate motor and driver for each axis, making the machine works more reliable

With such a small cost, you will get a complete machine with accessories as following.

Standard Accessories:

◆Special spindle design, start a new style of cnc system. Small, simple, this is the main features. But it can provide you an amazing result with its strong structure.
◆Even small, we still use 800w spindle to give it enough power. Ball screw gives it good resolution and less noise.
◆ Separate motor and driver for each axis, making the machine works more reliable